The System that has revolutionized how swimming pools are constructed
and renovated.
Natatec is a flexible blanket of PVC with a strong inner core of polyester
mesh fabric specifically designed for commercial pool applications. Since
its introduction, Natatec has become the preferred method of constructing
and renovating almost any type of swimming pool.
Manufactured from specially formulated PVC and reinforced with a high strength
polyester mesh core, Natatec is custom-fitted and bonded on-site to provide
an attractive, easily maintained, totally watertight, virtually indestructible
pool surface.
What It Does
Natatec membranes dramatically reduce construction and renovation cost,
limits maintenance and greatly extends the life span of your pool facility.
Because the pool walls or structure are used only for support, Natatec provides
a means to renovate even the worst pools. In new construction, simple cost-efficient,
non-watertight supporting structures are adequate. Our membrane provides
an attractive, flexible, watertight lining inside virtually any supporting
structure.
Our system allows you to completely forget about costly, time consuming
annual surface maintenance. Sandblasting, chipping, patching, caulking and
recoating are eliminated. Renovating old or out-of-commission pools becomes
easy. Expensive conventional reconstruction is eliminated because the membrane
spans cracks, joints and other defects with its tough, flexible blanket.
Clean,
Safe and Sanitary!
The smooth, non-porous surface of our membranes helps prevent the growth
of bacteria and algae and makes pool cleaning easy and inexpensive. With
our system, gone are the days of acid washing and using other harsh chemicals
to clean your pool. The neutral PVC surface does not alter water chemistry
like plaster, grout, concrete and other porous surfaces-a constant operational
savings. By providing a watertight lining, our membranes reduce the energy
and chemical use attributed to water lost through leakage. A Natatec pool
maintains its attractive, clean appearance while meeting the strictest health
standards and lowering operating costs.
Added
Slip Resistant Safety
A Natare exclusive! Our specially designed, embossed, slip-resistant material
provides on of the most sure footed surfaces available for pool use. Zero
depth areas, wading pools, steps, gutters, aquatic playgrounds, and other
wet areas where added security is required are ideal areas to put our embossed
slip-resistant material to the test.
New Solutions to Old Pool Problems
A one-piece, watertight, flexible lining within the pool shell, our system
is perfectly suited to renovation applications. Virtually any pool, no matter
how old or deteriorated, may be successfully renovated with Natatec Membranes.
Moving expansion joints, cracks, spalling concrete, peeling paint, and even
structural movement are problems that are solved with Natatec. Our systems
respond especially well to the problems commonly associated with aluminum
and other metal pools. Corrosion, pitting, staining, and coating failures
quickly become forgotten problems. No matter what the structure, the Natatec
system provides protection and extends pool life. Our impervious lining
isolates the pool structure from damaging pool water.
No
Glass in The Pool
Natatec is the solution for repairing fiberglass failure in swimming pools.
Fiberglass pool coatings are notorious for cracking and rapid failure. Removing
failing fiberglass material in pools can be an expensive endeavor. However,
for a fraction of the cost, Natatec can be installed directly over the existing
fiberglass surface to create a new safe, worry-free surface. The material
is cut-to-fit and welded on-site to insure you of a pool coating that is
completely watertight, attractive and long-lasting. Natatec's flexibility
completely eliminates concerns with cracking and delamination.
Ease
of Installation
Our installation system allows for a tailored fit for in-ground, on-ground
or elevated swimming pools. Previously difficult installations and renovations
are made possible. Unlike conventional coatings, Natatec membranes can be
installed in almost any weather. The drastic reduction of downtime for installation,
make it possible to renovate your pool facility in record time.
Three Standard Eye Catching Colors
Create a beautiful pool that has an amazingly long life with Sky Blue, Caribbean
Blue and White. A special Black material is available for racing lanes,
targets, custom logos and other pool details. Each color can be shaped,
cut and custom-designed to fit your special needs. Custom colors can also
be tailored to meet the unique look of your facility.
Membrane systems from Natare.
Uncompromised quality, limitless applications.
Natatec Membranes Stand the Test of Time
Proven in literally thousands of applications worldwide, PVC membrane systems
have been making pools work for more than 25 years! From the Yukon to Fiji
and practically everywhere in-between, Natatec membranes stand up to the
rigors of commercial and public pool use-we guarantee it!
Natatec Membrane Systems are Not Only for Pools
Anytime you need to keep water where it belongs, think about Natatec. Natatec
membranes can easily and cost effectively add years of continuous service
to fountains, storage tanks, reflecting pools, man-made lakes and other
special situations where water containment or absolute waterproofing is
required.
Natatec has a multitude of applications ranging from waste water management
and custom tank linings to structure waterproofing.
Natatec can be specially tailored to fit almost any containment or waterproofing
application while outlasting practically any other material. It conforms
to the supporting structure and retains its elasticity even in low temperatures.
The System that has revolutionized how swimming pools are constructed
and renovated. 
What It Does
New Solutions to Old Pool Problems 
Three Standard Eye Catching Colors
Membrane systems from Natare.
Natatec Membrane Systems are Not Only for Pools