What
does your name mean?
Our name originated from the Latin verb, "to swim."
Return to Top
What products do you
offer?
Natare offers virtually all products for complete aquatic recreation including
swimming pools, wet playgrounds, competition lap pools, spas, water features
and wave pools. Specifically our products consist of the following:
Pre-engineered Uniwall Swimming Pool Construction Systems
Permanently Watertight Modular Stainless Steel Construction
Elevated Pools
PVC Grating Systems
NataDek and SoftDek Floor and Deck Surfacing
Natatec Perimeter Recirculation Systems
 Movable
Bulkheads
Natatec PVC Membrane Systems
Hydrotherapy pools, whirlpools and spas
Custom Fountains and Water Features
Multi-Purpose Program Equipment
Deck Equipment
Accessibility Equipment
Cleaning and Maintenance Equipment
Vacuum, Hi-Rate and MicroCell Hi-Rate Sand Filters
Mechanical and Electrical Equipment
Water Quality and Chemical Treatment Equipment
Operational, Program and Facility Equipment
Return to Top
What additional support do you provide?
Natare offers technical assistance and consulting services to assist in
the design, construction
and maintenance of your facility. Engineering,
technical and design assistance in the selection, specification and use
of our products and systems is also readily available from our experienced
staff. Natare also offers consulting services including on-site evaluations
and problem-solving techniques for individual projects.
Return to Top
Are your products ideal for renovation or new
construction?
Both. Any of our systems and equipment can be used for renovation
or new construction. Many of our systems including the Natatec Membrane
Systems and NataDek Floor and Deck Surfacing provide a cost effective,
low maintenance solution and actually help prolong the life of the aquatic
facility. In addition, our Bulkheads are great for accommodating multiple
programming activities.
Return to Top
Do you only supply equipment and systems for
commercial use?
Yes. Natare builds equipment, systems and services for commercial swimming
pools, aquatic facilities and water features. However, we also work with
individuals on high-end residential projects.
Return to Top
Where do you build your products?
Natare manufactures most products at the facility in Indianapolis, Indiana.
Products are either partially or fully constructed and then shipped to
the job site. Some products, like our Natatec Membrane Systems and NataDek
Floor and Deck Surfacing can be installed on site by our field staff.
Natare also works with a host of dealers and distributors throughout the
world who deliver and construct Natare equipment and systems. We also
sell products directly to general, specialty and mechanical contractors,
municipalities and builders in states where we do not have an authorized
builder/distributor.
Return to Top
Who installs your products?
Natare works with a network of builders throughout the world who install
our products after they are shipped from our facility in Indianapolis,
Indiana. In some cases, we install the product directly for the customer.
In addition to working through our builder/distributor base, we also sell
our products directly to general, specialty and mechanical contractors,
municipalities and builders in states where we do not have an authorized
builder/distributor.
Return to Top
What are specifications?
Specifications are precise written explanations of characteristics, capabilities
and requirements for a particular piece of equipment or system. Specifications
also include performance standards, qualifications and installation program
requirements.
Return to Top
How can I get your specifications?
Specifications for our products are available through this site. PDF formatted,
or read-only, files are available upon visiting the Literature
& Technical Information section. CSI formatted files are available
if you register with our site.
Return to Top
How can I get your typical designs or drawings?
Typical designs, details, drawings and illustrations for our products
are available on-line. PDF formatted, or read-only, files are available
upon visiting the Literature & Technical
Information section. Word processing, spreadsheets and AutoCAD formatted
files are available if you register with
our site.
Return to Top
Do you provide AutoCAD details?
Yes. If you register with our site, you
may download typical drawings and specifications in AutoCAD format. Login
if you are already a member.
Return to Top
Do I have to register?
No. You can download PDF formatted files of our brochures, specifications,
typical drawings, reference lists and articles for specific equipment.
An assortment of engineering information about pools, spas and water features
is also available. If you want further details or editable files you will
need to register.
Return to Top
What do I get if I become a member of natare.com?
Typical designs or illustrations, articles, reference lists and specifications
are all available in PDF format without signing-in or becoming a member.
For editable text, AutoCAD, spreadsheets and word processing files, you
must register to become a member of our
site. PDF formatted files are available by visiting the Literature
& Technical Information section.
 Membership
includes:
• Engineering documents and technical resources
• AutoCAD files and architectural details
• CSI formatted specifications
• Updates for above resources and new product information
Return to Top
How do I contact you?
You may contact us directly at our Indianapolis, Indiana offices or by
e-mail. Click here for contact
information.
Return to Top
Do you have a Privacy Statement?
Yes. View Natare's Privacy Policy and
Terms of Use.
Return to Top
Still have questions?
Contact us.
Return to Top
|
