BEHIND THE SCENES: Pool Gutter Renovation

December 6, 2019 | Categories: Natare Projects, Pool Equipment & Systems

Pool renovations don’t just consist of fixing a pool’s physical appearance. It also includes the mechanical elements to ensure all parts are working properly and the pool is safe and ready for use. We recently installed our perimeter gutter recirculation system around an activity pool during a renovation at a Nebraska activity center. It is […]

Read Full Story »

Natare Corporation & Canadian Partner Help Aquatic Facility with FINA Compliancy

December 4, 2019 | Categories: Natare Corporation News, Press Releases

INDIANAPOLIS, IN – Natare Corporation, along with their Canadian partner, Austin Carroll Pool Construction Ltd., recently provided a stainless steel headwall to assist the multi-faceted Wayne Gretzky Sports Centre with FINA compliancy. FINA (Fédération Internationale de Natation / International Swimming Federation) is the governing organization of all aquatics. It sets the rules and regulations for […]

Read Full Story »

BEHIND THE SCENES: Pool Surface Renovation

November 27, 2019 | Categories: Natare Projects, Pool Equipment & Systems

The calendar may say it’s fall, but there’s no better time for commercial pool renovations! We recently renovated a concrete recreational swimming pool in New York with our Natatec® PVC membrane lining system. Every year, the pool had to be repainted before it was opened for the season. Now that the PVC membrane has been […]

Read Full Story »

BEHIND THE SCENES: What the Inside of a Pool Bulkhead Looks Like

November 22, 2019 | Categories: Natare Projects, Pool Equipment & Systems

Have you ever wondered what the inside of a pool bulkhead looks like? While we were building one in our manufacturing facility, we managed to capture a few photos before it was completed. As you can see, one side has already been covered with the slip-resistant GPM grating and lane markings, while the other side […]

Read Full Story »

BEHIND THE SCENES: Shipping the Missing Pool Puzzle Piece

November 21, 2019 | Categories: Natare Projects, Stainless Steel Pools

Our swimming pools can sometimes be a big puzzle. In this behind the scenes look, our team is about to ship out one of the pieces, a stainless steel pool wall. They are always working extremely hard to make sure everything is ready to go and in place before our pools leave the facility.

Read Full Story »

BEHIND THE SCENES: Manufacturing a Large Swimming Pool before Assembly

October 16, 2019 | Categories: Natare Projects, Stainless Steel Pools

From bare bones to ready for shipment, these images show what it looks like to build a large stainless steel swimming pool before it’s assembled and installed on-site. The sections (or pieces) are manufactured in our Indianapolis facility. Once they are complete, they are packed up and shipped to their final destination, where they are […]

Read Full Story »

BEHIND THE SCENES: Stainless Steel Elevated Swimming Pool

October 8, 2019 | Categories: Natare Projects, Stainless Steel Pools

In August, you saw the installation of a one-piece, elevated swimming pool in Tennessee. Now it’s Canada’s turn. Recently, our Canadian partners, Austin Carroll Pool Construction Ltd., installed one of our pools on the roof of a multi-family residential building. The difference between the two pools is that this particular one was shipped in multiple […]

Read Full Story »

BEHIND THE SCENES: The Bones of a New Stainless Steel Pool

October 3, 2019 | Categories: Natare Projects, Stainless Steel Pools

Most pictures we publish show what the pool or spa looks like after it’s been built, installed, and completed. Here’s a glimpse of what the bones of a stainless steel pool looks like before the wall panels are added. This particular project will eventually be constructed into an infinity-edge pool. It’s always an exciting time […]

Read Full Story »

BEHIND THE SCENES: How tall can a pool wall panel be?

October 2, 2019 | Categories: Natare Projects, Stainless Steel Pools

Our stainless steel pool wall panels can be a variety of heights depending on the project and the facility’s needs. Just take a look at the height comparison between our sales engineer, Josh, and the deep end of a pool that was recently constructed. He’s 6′ tall and that wall panel is approximately 10′ tall.

Read Full Story »

BEHIND THE SCENES: Stainless Steel Pool Installation

September 17, 2019 | Categories: Natare Projects, Stainless Steel Pools

It’s all coming together! We have two stainless steel pool systems currently being installed at a project site in Canada. The leisure pool was assembled in just ONE day. When we say that our stainless steel pools have quick installation, we mean it!  

Read Full Story »

BEHIND THE SCENES: Pool Bulkhead Travels Overseas

September 6, 2019 | Categories: Natare Projects, Pool Equipment & Systems

Another Natare project has left Indianapolis! This movable swimming pool bulkhead has custom colored grating and lane markings. It was so big that we had to separate it into two (2) shipping containers! Its new home will be in a 50 meter Olympic-sized swimming pool overseas.

Read Full Story »

BEHIND THE SCENES: Elevated Pool Installation

August 30, 2019 | Categories: Natare Projects, Stainless Steel Pools

Up, up and away! Our Tennessee elevated pool has officially been delivered and set into place on the 9th floor of a residential building. Now it’s time for the finishing touches. We can’t wait to see the completed product! See the pool be carefully lifted high above the city and set into place! (Video courtesy […]

Read Full Story »

BEHIND THE SCENES: Swimming Pool Hydrostatic Testing

August 23, 2019 | Categories: Natare Projects, Stainless Steel Pools

This elevated swimming pool is almost ready for its new home! It recently underwent hydrostatic testing and passed with flying colors. It will soon be ready for installation a few stories above ground at a private residence in Tennessee. What is hydrostatic testing? Water is added to the swimming pool as if it would be […]

Read Full Story »

Natare Corporation Selects Austin Carroll Pool Construction Ltd. as Its Premier Partner for Canada

February 20, 2019 | Categories: Natare Corporation News, Press Releases

INDIANAPOLIS, IN – Natare Corporation is pleased to announce it has appointed Austin Carroll Pool Construction Ltd. as its Premier Partner for Canda. As Natare’s Premier Partner, this newly formed partnership allows Austin Carroll to continue its heritage of quality and service with the addition of the full range of Natare stainless steel pools, filtration and […]

Read Full Story »

Tips on Preparing Your Swimming Pool against a Hurricane

September 17, 2018 | Categories: Blog

The 2019 hurricane season is here and from June 1 through November 30 everyone along the coasts will be gearing up for the windy ride. When it comes time to defend your home or business, you will board up windows and doors, place sandbags around your property and then evacuate with your family and pets. […]

Read Full Story »
Back to Top