BEHIND THE SCENES: Manufacturing a Large Swimming Pool before Assembly

October 16, 2019 | Categories: Natare Projects, Stainless Steel Pools

From bare bones to ready for shipment, these images show what it looks like to build a large stainless steel swimming pool before it’s assembled and installed on-site. The sections (or pieces) are manufactured in our Indianapolis facility. Once they are complete, they are packed up and shipped to their final destination, where they are […]

Read Full Story »

BEHIND THE SCENES: Stainless Steel Elevated Swimming Pool

October 8, 2019 | Categories: Natare Projects, Stainless Steel Pools

In August, you saw the installation of a one-piece, elevated swimming pool in Tennessee. Now it’s Canada’s turn. Recently, our Canadian partners, Austin Carroll Pool Construction Ltd., installed one of our pools on the roof of a multi-family residential building. The difference between the two pools is that this particular one was shipped in multiple […]

Read Full Story »

BEHIND THE SCENES: The Bones of a New Stainless Steel Pool

October 3, 2019 | Categories: Natare Projects, Stainless Steel Pools

Most pictures we publish show what the pool or spa looks like after it’s been built, installed, and completed. Here’s a glimpse of what the bones of a stainless steel pool looks like before the wall panels are added. This particular project will eventually be constructed into an infinity-edge pool. It’s always an exciting time […]

Read Full Story »

BEHIND THE SCENES: How tall can a pool wall panel be?

October 2, 2019 | Categories: Natare Projects, Stainless Steel Pools

Our stainless steel pool wall panels can be a variety of heights depending on the project and the facility’s needs. Just take a look at the height comparison between our sales engineer, Josh, and the deep end of a pool that was recently constructed. He’s 6′ tall and that wall panel is approximately 10′ tall.

Read Full Story »

BEHIND THE SCENES: Stainless Steel Pool Installation

September 17, 2019 | Categories: Natare Projects, Stainless Steel Pools

It’s all coming together! We have two stainless steel pool systems currently being installed at a project site in Canada. The leisure pool was assembled in just ONE day. When we say that our stainless steel pools have quick installation, we mean it!  

Read Full Story »

BEHIND THE SCENES: Elevated Pool Installation

August 30, 2019 | Categories: Natare Projects, Stainless Steel Pools

Up, up and away! Our Tennessee elevated pool has officially been delivered and set into place on the 9th floor of a residential building. Now it’s time for the finishing touches. We can’t wait to see the completed product! See the pool be carefully lifted high above the city and set into place! (Video courtesy […]

Read Full Story »

BEHIND THE SCENES: Swimming Pool Hydrostatic Testing

August 23, 2019 | Categories: Natare Projects, Stainless Steel Pools

This elevated swimming pool is almost ready for its new home! It recently underwent hydrostatic testing and passed with flying colors. It will soon be ready for installation a few stories above ground at a private residence in Tennessee. What is hydrostatic testing? Water is added to the swimming pool as if it would be […]

Read Full Story »

How to Avoid Stainless Steel Corrosion in Swimming Pools

March 29, 2017 | Categories: Stainless Steel Pools

Stainless steel has a long and successful history in swimming pool environments. It has a lower corrosion rate compared to other metals and materials, but like all nice things, you must take care of it to keep it looking sleek. Success is achievable when the right stainless steel and finish are selected, the pool water […]

Read Full Story »

Intro to Pool Pumps and Proper Water Circulation

November 4, 2016 | Categories: Pool Equipment & Systems, Stainless Steel Pools

Pool circulation is critical if you want to maintain that perfect “dive right in” crystal blue water. Proper pool water circulation helps distribute chemicals evenly, so no matter how hard you try to keep your pool chemistry balanced, you will still run into problems if the water isn’t circulating properly. Below you will find a […]

Read Full Story »

Stainless Steel Pools: Q&A on Composition and Corrosion Resistance

November 3, 2016 | Categories: Pool Equipment & Systems, Stainless Steel Pools

Stainless steel is by far the most durable and trouble-free material available for use in a swimming pool, spa or aquatic environment. Stainless steel is known for its classic look, strength, hygienic properties and resistance to corrosion. Not to mention they construct buildings, bridges, commercial kitchens and even those fancy appliances everyone wants in their homes. The […]

Read Full Story »

Pool Design and Construction: Common Q&A When Building a Therapy Pool

October 31, 2016 | Categories: Pool Equipment & Systems, Stainless Steel Pools

Starting a new pool project can be a challenge, especially when it needs to offer therapeutic benefits to you or your clients. We get a lot questions about the design, selection and creative process involved in choosing a therapy pool. Our experienced consultants have heard and seen it all and are here to help answer your […]

Read Full Story »

Findon Swim School is Open for Business: Complete with a Natare 25M Stainless Steel Lap Pool

September 27, 2016 | Categories: Natare Projects, Stainless Steel Pools

Natare made its way to Australia to construct a 25M stainless steel lap pool and all of its components for the Findon Swim School. The stainless steel lap pool has 6 total racing lanes (5 full length) and a large step section with a handicap access lift. Findon puts a major emphasis on the safety […]

Read Full Story »

Mountaintop Stainless Steel Pool in New Zealand

October 10, 2015 | Categories: Natare Projects, Pool Equipment & Systems, Stainless Steel Pools

When a former Olympic swimmer wants a mountaintop lap pool, we give him a mountaintop lap pool. When a noted New Zealand business leader and former Olympic swimmer decided to add a pool to his home high in the Crown Range on the South Island of New Zealand, he looked to Natare Pools for a custom lap pool. Mark […]

Read Full Story »

Famous Natare Pool to appear on New TV Show

June 24, 2014 | Categories: Natare Projects, Stainless Steel Pools

THE MARINA BAY SANDS’ SKYPARK POOL, MANUFACTURED BY NATARE, WILL BE FEATURED ON “THE POOL MASTER,” JULY 18TH. Update: Original post stated July 11th, but producers changed the date to July 18th. A brand new TV Show on the Animal Planet Channel is not necessarily about animals…it’s all about swimming pools. The Pool Master is hosted […]

Read Full Story »

New York Townhouse gets a Top Floor Lap Pool

April 18, 2013 | Categories: Natare Corporation News, Natare Projects, Stainless Steel Pools

Assembled at Natare’s state-of-the-art facilities in Indianapolis, a huge stainless steel lap pool has been custom made for a townhouse near New York’s Central Park in Manhattan. By the Numbers: 16,500 pounds (empty) 100,000 pounds (with water) Water Capacity: 9,100 gallons 44′ x 10′   The roof of the townhouse will be opened up, and […]

Read Full Story »
Back to Top